Hydraulic Press Brake Bending Machine for sale

Sheet metal bending machine is important sheet metal processing equipment. According to the synchronous mode, the hydraulic bending machine can be divided into: shaft synchronization, hydraulic synchronization, and electro-hydraulic synchronization. Shearchy NC Easybend Hydraulic Press Brake with reasonable price and special design is popular all around the world. This passage will teach you how to use and maintain hydraulic bending machine in daily production.

How to carry out daily maintenance of Hydraulic Bending Machine?

The overhaul and repair of bending machine is divided into daily check, weekly check, monthly check, quarterly check and semi-annual check.

  • Daily Check:

Main maintenance items include hydraulic system, spindle lubrication system, guide rail system, cooling system, etc. Daily check is to check according to the normal condition of the system. For example, when the process of spindle lubrication system is tested, the power supply is on, and the oil pump should operate normally. If the power lamp is not on, the spindle should be stopped. Contact mechanical engineer for maintenance.

  • Weekly Check:

Its main overhaul items include machine parts and spindle lubrication system. The user should check these correctly on a weekly basis, especially for the parts of the machine tools to remove iron filings and carry out external cleaning.

  • Monthly Check:

Check the power supply and air dryer. Under normal conditions, the power supply rated voltage is 180v~220v with frequency of 50 Hz. If there is an abnormality, it should be measured and adjusted. The air dryer should be removed once a month, and then cleaned and assembled.

  • Quarterly Check:

The overhaul is mainly from machine body, hydraulic system and spindle lubrication system. When the press brake tool body is checked, it is mainly to see whether the precision and level of the bending machine tool meet the requirements. When checking the hydraulic system and the spindle lubrication system, if there is any problem, it should be cleaned and replaced with new hydraulic oil.

  • Semi-annual Check

After half a year, the hydraulic system, spindle lubrication system and X axis of the bending machine tool should be checked carefully. If you have questions, contact the mechanic immediately.

Routine maintenance can reduce the failure rate and prolong the using life of hydraulic bending machines. Regular overhaul and maintenance is necessary to ensure production. If you are interested in hydraulic press brake China, please contact us immediately. Our e-mail is mandy@shearchy.com